Nielit O Level Solved Paper
Internet and Web Design
Q: Explain in brief: Bus, Star and Ring Network Topologies
Physical and logical arrangement of devices with a network is known as Topology.
Bus Topology
A bus topology is a network setup in which each computer and
network device are connected to a single cable or backbone.A signal from the source is broadcasted and it travels to
all workstations connected to bus cable. Although the message is broadcasted
but only the intended recipient, whose MAC address or IP address matches,
accepts it. If the MAC /IP address of machine doesn’t match with the intended
address, machine discards the signal.
Advantages of bus topology
- It works well when you have a small network.
- Easiest network topology for connecting computers or peripherals in a linear fashion.
- Requires less cable length than a star topology.
Disadvantages of bus topology
- Difficult to identify the problems if the whole network goes down.
- It can be hard to troubleshoot individual device issues.
- Not great for large networks.
- Terminators are required for both ends of the main cable.
- Additional devices slow the network down.
- If a main cable is damaged, the network fails or splits into two.
Star Topology
A star topology is a topology for a Local Area Network (LAN)
in which all nodes are individually connected to a central connection point,
like a hub or a switch. A star takes more cable than e.g. a bus, but the
benefit is that if a cable fails, only one node will be brought down. The
central network device acts as a server and the peripheral devices act as
clients.
Advantages of star topology
- Centralized management of the network, through the use of the central computer, hub, or switch.
- Easy to add another computer to the network.
- If one computer on the network fails, the rest of the network continues to function normally.
Disadvantages of star topology
- Can have a higher cost to implement, especially when using a switch or router as the central network device.
- The central network device determines the performance and number of nodes the network can handle.
- If the central computer, hub, or switch fails, the entire network goes down and all computers are disconnected from the network.
Ring
A ring network is a local area network (LAN) in which the
nodes (workstations or other devices) are connected in a closed loop
configuration. Adjacent pairs of nodes are directly connected. Other pairs of
nodes are indirectly connected, the data passing through one or more
intermediate nodes. Each packet is sent around the ring until it reaches its
final destination. Ring topologies are used in both local area network (LAN)
and wide area network (WAN) setups. The picture to the right is a visual
example of a network using the ring topology to connect several computers
together.
Token Passing (in brief) : Token contains a piece of
information which along with data is sent by the source computer. This token
then passes to next node, which checks if the signal is intended to it. If yes,
it receives it and passes the empty to into the network, otherwise passes token
along with the data to next node. This process continues until the signal
reaches its intended destination.The nodes with token are the ones only allowed to send data.
Other nodes have to wait for an empty token to reach them. This network is
usually found in offices, schools and small buildings.
No comments:
Post a Comment