Tuesday, 31 May 2016

January, 2015
M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
IMPORTANT INSTRUCTIONS:

1. Question Paper in English and Hindi and Candidate can choose any one language.

2. In case of discrepancies in language, English version will be treated as final.

3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.

4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question
paper, as per the instructions contained therein. PART ONE is NOT to be answered in the
answer book.
5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,
who complete PART ONE earlier than one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)
1. Each question below gives a multiple choice of answers. Choose the most appropriate
one and enter in the “OMR” answer sheet supplied with the question paper, following
instructions therein. (1x10)

1.1 The memory allocation scheme subject to “external” fragmentation is
A) segmentation
B) swapping
C) pure demand paging
D) multiple fixed contiguous partitions

Network Layer

Network Layer
What is Network Layer?
The network layer is concerned with getting packets from the source all the way to the destination. The packets may require to make many hops at the intermediate routers while reaching the destination. This is the lowest layer that deals with end to end transmission. In order to achieve its goals, the network layer must know about the topology of the communication network. It must also take care to choose routes to avoid overloading of some of the communication lines while leaving others idle. The network layer-transport layer interface frequently is the interface between the carrier and the customer, that is the boundary of the subnet. The functions of this layer include :

Monday, 30 May 2016

Set Relation

Set Relation Explanation , Relation,Symmetric,Reflexive,Transitive,Equivalence 

Relation

Tuesday, 24 May 2016

July, 2015 M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

 July, 2015
M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
IMPORTANT INSTRUCTIONS:

1. Question Paper in English and Hindi and Candidate can choose any one language.

2. In case of discrepancies in language, English version will be treated as final.

3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.

4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question
paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.
5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,
who complete PART ONE earlier than one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100

(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate
one and enter in the “OMR” answer sheet supplied with the question paper, following
instructions therein. (1x10)
1.1 What is World Wide Web?
A) A computer game
B) A software program
C) Another name for the Internet
D) The part of the Internet that enables information sharing

July, 2015 M1-R4: IT TOOLS AND BUSINESS SYSTEMS

July, 2015
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
IMPORTANT INSTRUCTIONS:
1. Question Paper in English and Hindi and Candidate can choose any one language.

2. In case of discrepancies in language, English version will be treated as final.

3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.

4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question
paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.
5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,
who complete PART ONE earlier than one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS                                                     TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)
1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 EEPROM stands for
A) Electrically Erasable Programmable Read of Memory
B) Erasable Electrically Programmable Read Only Memory
C) Easily Erasable Programmable Read Only Memory
D) Electrically Erasable Programmable Read Only Memory
Answer

Long and medium term scheduling os

Types of scheduling - Long and medium term scheduling

In single task operating systems the issue of scheduling is trivial: after the system has set up the execution environment of a process, CPU control is given to it until the process itself exits. In a pun, the system is not operating at all during the program's execution, save for providing services through subroutine calls. It's only with multi-tasking operating systems that scheduling becomes a top entry in a designer's agenda.

In many multitasking systems the processor scheduling subsystem operates on three levels, differentiated by the time scale at which they perform their operations. In this sense we differentiate among:

Monday, 23 May 2016

 January, 2015
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
IMPORTANT INSTRUCTIONS:
1. Question Paper in English and Hindi and Candidate can choose any one language. 2. In case of discrepancies in language, English version will be treated as final.
3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.
4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question
paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.
5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS
 TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “OMR” answer sheet supplied with the question
paper, following instructions therein. (1x10)
1.1 Numbers in base 16 are called as
A) Octal System
B) Hexadecimal System
C) Decimal System
D) Binary Numbering System

July-2014 M1-R4: IT TOOLS AND BUSINESS SYSTEMS

 July, 2014
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.
2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3
HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)
1. Each question below gives a multiple choice of answers. Choose the most  appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 Which of this not a input device
A) Joystick
B) Keyboard
C) Printer
D) Mouse
Answer

July, 2014 M1-R4: IT TOOLS AND BUSINESS SYSTEMS

 July, 2014
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.

2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS
              
TOTAL MARKS: 100

(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 Which of this not a input device
A) Joystick
B) Keyboard
C) Printer
D) Mouse
Answer

July, 2013 M1-R4: IT TOOLS AND BUSINESS SYSTEMS

 July, 2013M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions
and PART TWO contains FIVE questions.
2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will
be supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer
book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS                                                    TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)
1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question  paper, following instructions therein. (1x10)

1.1 Which of the following is fastest memory?
A) Secondary Memory
B) Auxiliary Memory
C) Cache Memory
D) Virtual Memory
Answer

Paper M1-R4: IT TOOLS AND BUSINESS SYSTEMS-jan-13

 January, 2013
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book
for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS                                                      TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)
1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)
1.1 Decimal equivalent of the binary number 110111 is:
A) 55
B) 56
C) 57
D) 58
Answer 

1.2 Numbers in base 10 are called as
A) Octal System
B) Hexadecimal System
C) Decimal System
D) Binary Numbering System
Answer 

July, 2012
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:

1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will
be supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book
for PART TWO immediately after handing over the answer sheet for PART ONE.
TOTAL TIME: 3 HOURS                                                        TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)

1.1 Which of the following is not UNIX based?
A) Mac OS
B) Fedora
C) MS-DOS
D) Android
Answer

Sunday, 22 May 2016

Paper IT TOOLS AND BUSINESS SYSTEMS Jan-12

January, 2012
M1-R4: IT TOOLS AND BUSINESS SYSTEMS
NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.
TOTAL TIME: 3 HOURS                                                          TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)

1.1 A light-sensitive device that converts drawings, printed text or images into digital form
A) mouse
B) scanner
C) keyboard
D) laser printer
Answer
 July, 2011

M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:

1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.

2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3                                                                          HOURS TOTAL MARKS: 100
                                                                                                      (PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)
1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)

1.1 Multiprocessing means
A) Simultaneous processing with two or more processes
B) Simultaneous running of two or more programs
C) Running of two or more processes
D) None of the above
Answer 

Paper IT Tools and Business Systems January 2011

 January, 2011

M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.
TOTAL TIME: 3 HOURS                                                                         TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)
1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)

1.1 Which of the following is a communication device?
A) Printer
B) Monitor
C) Keyboard
D) Modem
Answer

Paper IT Tools and Business Systems -July-2010

M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book
for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS                                                                               TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)
1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)
1.1 Which of the following is a non-volatile memory?
A) Random Access Memory
B) Read Only Memory
C) Virtual Memory
D) Cache Memory
1.2 MIDI means
Answer

Thursday, 19 May 2016

Line Configuration

A network is a combination of more than one devices which connect from some medium (wire , wireless) called channel line configuration refer physical communication channel  access method . Three types of access method are follows..


  • Point to Point
  • Multi Point

Sunday, 15 May 2016

Computer Fundamental MCQ answer

This is 50 question/answer set useful for BCA, MCA, O Level,CCC,PGDCA students 

Q 1 : Basic Application of computer
(A)Education
(B)Games
(C)Business
(D)All the above

Q 2 : Technology after IC
(A)LSI
(B)VLSI
(C)SSI
(D)All the above

Thursday, 12 May 2016

Difference between Computer Architecture and Computer Orgzanization

Computer organization

This is implementation of Computer Architecture. It deals with operational feature of computer that how hardware are working by Computer Architecture and helps programmer to understand working model of hardware and enables them coding for accessing different method of hardware and interrupt ,control signal etc.

Tuesday, 10 May 2016

Modes of channel operation

Mode of channel operation define accessing mode of the medium for send and receive data. Types and examples of different types of modes are follows

Simplex

Data in simplex channel is always moves in one direction. Simplex is suitable for many kind of application where reply is necessary because it is not possible to send back error or control signals to the transmit end.

Monday, 9 May 2016

Proper Case String VB

Function Name : StrConv

Convert a string into desire specified format.

Syntax

StrConv(String,VbStrConv) as String 

Tuesday, 3 May 2016

Difference Between Coupling and Cohesion

Coupling Indicate the relationship between the different modules. Cohesion indicates a relation inside of a single module.
Coupling Cohesion